Liftop elevator air conditioning remote control timing setting

Recently, many elevator air conditioner customers have reported that no matter how they press the remote control, the air conditioner still doesn't respond. Sometimes it turns on and off automatically by itself. Such problems are all caused by incorrect setting of the air conditioner's timer or accidentally pressing the "timer" button.

Regarding the issue of how to set the timer for an air conditioner remote control, today's experience article will discuss this topic, hoping to be of help to customers in need.

First of all, let's rule out whether the air conditioning in the elevator is set to a timer.

If either of the above two situations occurs, we can press the "Timer On" button on the remote control to cancel the timer, and then unplug the battery on the back of the remote control. If it still cannot be controlled after resetting, it means that the previously set timing data has not been completely cancelled. You need to use the "Switch" button on the display panel to turn off the power, then unplug the air conditioner plug, scrape the metal beside it, wait for a few minutes, and then plug it back in and reset again.

The following is a detailed explanation of how to set the timing:

The first step: Install the battery on the remote control.	Step 2: Check the display screen, press "Clock", and then set the current Beijing time (reference time) by pressing "Hour" and "Minute" respectively. [The remote control setting time is 12-hour system. Note that "AM" will be displayed in the morning and "PM" in the afternoon.] Wait for the flashing to complete, which means the clock has been set.

Step 3: Set the scheduled startup time. First, press the "Scheduled Start" button and adjust it by "hour" or "minute" as needed. For example: Set it to turn on at 8 a.m.	Step 4: Set the scheduled shutdown time. First, press the "Timed Off" button and adjust it by "hour" or "minute" as needed. For example: Set to shut down at 6 p.m.

Step 5: Align with the display panel of the air conditioner and press the "Power button".

After completing these 5 steps, the operation is already set up. You can also set the interval time for timed opening and closing to be reduced to 10 to 20 minutes to verify whether your operation is correct.

Here, I would also like to remind everyone that when using the remote control, be careful not to press other buttons on the remote control, which may cause the elevator air conditioner to malfunction.